Make Your Own Hats Part 9

WIRED ROSE--

This rose, when carefully made, is most beautiful and sells for an exorbitant price. To make the rose as ill.u.s.trated requires one-quarter of a yard of satin cut on the bias and one-eighth of a yard of velvet cut on the bias. If the velvet is one or more shades darker, the result will be more pleasing.

The rose is fas.h.i.+oned from petals cut like the ill.u.s.tration. The first three petals are cut from dimensions given in the ill.u.s.tration, two inches long and one and three-quarters inches wide. The next five petals should be one-quarter of an inch larger, and each succeeding row of five petals should be one-quarter of an inch larger than the preceding one.

The last row of petals is to be made from the velvet. Cut a piece of the tie wire long enough to reach around the outside edge of each petal, plus one and one-half inches. Lay the petals down wrong side up, bend the wire to the shape of the petal, lay the wire close to the edge and turn the raw edge over the wire one-eighth of an inch and glue in place with milliner's glue. Place a light weight on the petals until thoroughly dry.

Begin a.s.sembling the flower by first making a center from some of the sc.r.a.ps left from the velvet, or yellow rose stamens may be used; fold several small pieces into bud-like shapes of about one inch in length, sew strongly and fasten on a loop of the wire six inches long. Keep the point where all the petals are joined in as small a circ.u.mference as possible. Begin with the three small petals, pleat them at the bottom into as small a s.p.a.ce as possible, and sew to the center with the wrong side to the center. After they have been arranged, the edges may be crinkled down somewhat. Add the remaining petals according to their size. The last row of velvet petals is rather pretty if one or more is placed with the right side toward the center.

FLAT PASTED BLOSSOM--

A conventional flower which makes a beautiful tr.i.m.m.i.n.g may be made from the pattern for the wired rose first given. Cut five petals (of any size required) from velvet, and five the same size from silk or satin. Lay the velvet petals wrong side up and cover with milliner's glue. Lay on this a piece of tie wire one-quarter of an inch from the edge, allowing an extension of ends of the wire at the bottom of the petal. Lay the silk petal on top and press firmly. When dry arrange these five petals around a cl.u.s.ter of yellow stamens, which have been fastened to a loop of tie wire. This blossom should lie out flat when finished. Of course the shape of the petals may be changed in any way desired.

POINSETTIAS--

The petals of this blossom are also pasted to a lining, the poinsettia making a beautiful ornament. While a bright red is extremely lovely, a black poinsettia is equally effective. The petals should be made of velvet and lined with the same color in satin. These petals being narrow, only need a wire through the center. After the petals have been prepared, they should be a.s.sembled around a bunch of yellow stamens or knotted baby ribbon.

The foliage is made from green velvet lined with green silk. The accompanying ill.u.s.tration shows the proportion of both the petals of the blossom and the foliage. The stems may be wound with green or brown gum tissue.

POPPIES--

Poppies may be made from ribbon seventeen inches long and two and one-quarter inches wide. Cut two pieces five and one-half inches long.

This leaves one piece six inches long. This will make five petals. Cut the ends round on the five and one-half inch pieces, and cut one end of the six-inch piece round. Beginning at the center, close to edge, gather with a small running st.i.tch. Turn in the raw edges and draw the thread sufficiently to make the rounded ends curl over one inch, and fasten off the thread. These two long pieces make four petals. Pleat them very close at the center, sew together, finish the single petal the same and add it to the four petals. Knotted black baby ribbon or yellow stamens or both will make a beautiful center.

MORNING GLORIES--

Cut a circle of paper four inches in diameter. One quarter section of this will be the pattern for a morning glory. The circle may be larger if desired, but the size should depend somewhat upon the material used.

These dimensions are for a small blossom made of taffeta silk or organdie. If made of velvet or heavy silk, the pattern should be much larger.

Lap the straight edges one-eighth of an inch in and paste in place. This makes a cone. Cut a piece of tie wire six inches in length, lap one end over several knots of yellow baby ribbon and twist securely. Push the other end of wire through the cone from the inside and draw the knots down into the point. Make a short bend in the wire at the lower point of the blossom on the outside to prevent its slipping down on the wire. The upper edge of the cone may be rolled over a piece of tie wire and pasted if necessary; usually it stays in place without either sewing or pasting. The edge should be stretched slightly. Organdie or taffeta silk will stay rolled into place without the tie wire. Water color is used most effectively on these flowers to make the shading as true to nature as possible. If made of velvet they may be sewed down flat on a hat at the side joining, when a large stamen of twisted ribbon or chenille may be made to cover the joining in the cone.

ORCHID--

This blossom is especially adapted to the gown of the matron, or wherever a touch of lavender is desired. It is effectively combined with violets, or lilies-of-the-valley and maidenhair fern. The petals are made of satin ribbon one and one-quarter inches wide and of the peculiar pinkish lavender orchid shade. There are five petals in all--each calls for seven inches of ribbon. If possible, three of the petals should be one or two shades darker than the other two.

Fold a seven-inch piece of ribbon (one and one-quarter inches wide) in half with the right side out. Cut into shape like the ill.u.s.tration.

St.i.tch a seam along the curved edge one-eighth of an inch from the edge.

Twist a very small loop in one end of a piece of seven-inch tie wire and fasten up at folded end of the ribbon. Overhand this wire along the raw edges, turn to the wrong side and sew the wire in with a one-eighth-inch seam on the wrong side. This makes a French seam. Now spread the petal open flat, and push it up on the wire until the petal measures six inches in length. Gather the raw ends and wind them tight to the wire.

Finish the other four petals the same way.

NO. 1 PATTERN FOR THE CENTER--

This calls for a piece of velvet ribbon one and one-half inches wide and four inches in length. If possible this ribbon should be darker than the darkest petal, but of course should harmonize. Roll the ends and hem them down. Gather along one edge and draw down close around the looped end of a piece of tie wire in which a bunch of yellow stamens have been fastened. The blossom should be arranged with the three darker petals pointing up at the back of the center and the other two at the front drooping.

NO. 2 PATTERN FOR THE CENTER--

This center is made from a piece of velvet ribbon three and one-half inches long and one and one-quarter inches wide. Fold lengthwise, with the satin side out. At one end sew straight across, making a seam one-eighth of an inch deep and turn. Cut the other end like the diagram and sew this with the velvet side out, leaving a tiny s.p.a.ce at the bottom to insert the wire. This now looks something like a "Jack in the Pulpit." Twist a few yellow stamens in the end of a piece of seven-inch tie wire and push the other end down through the little opening left at the lower point and draw the stamens down in as low as desired. Make a small, short loop in the tie wire close to the blossom to prevent its slipping back down on the wire.

Each year there are new developments in flower making, but the principles are the same. If a few are mastered, there is usually very little difficulty experienced in copying others which may appear from year to year. Lovely flowers may be made from a few inches of hat braids which are left over or from wool and raffia, maline or colored nets.

BLOSSOMS OF MALINE OR NET--

These may be made by using the same pattern as for the American Beauty rose, selecting the size required. (See ill.u.s.tration.) Lay a strip of tie wire inside along the bias fold. Gather along the curved edge and draw down tight. This brings the two ends of the tie wire together, and they should be twisted lightly. Arrange four or five leaves around a few yellow stamens. If green tie wire is used, it is not necessary to wind the stems; otherwise brown gum tissue may be wound around the stem.

From this pattern many different blossoms may be made, varying it slightly, such as rosebuds, sweet peas, and apple blossoms.

SWEET PEAS--

Cut four petals after the same pattern, making one about one and one-half inches and two one inch, then a small one for the center, or a few knots of baby ribbon may be used for the center. Arrange the petals in a natural-looking blossom.

VIOLETS--

No flower is more popular than the violet, and a cl.u.s.ter of handsome violets make a most acceptable gift at any time.

Violet-colored satin ribbon about one-quarter of an inch in width is used. Begin by tying a knot one inch from the end, tie another one inch from this knot; continue until there are five or six knots one inch apart. In tying, try to keep the satin side of the ribbon out and make as round a knot as possible by pus.h.i.+ng the ribbon edges together on the knot. Do not tie too tightly. A little practice is needed, but the blossom is easily made. Hold the first knot between the thumb and finger, bring the third knot up and place with it, then the fifth, and so on, until the knots are all placed--usually three on one side, and two or three on the other. Cut green tie wire six or seven inches long for stems. Wind an inch of the end over the ribbon between these folded knots and twist. Cut the ribbon off pointed, leaving one-half inch end.

Two shades of ribbon may be used if desired. Sometimes a few yellow stamens are fastened in with the wire or a few French knots in yellow added at the center after the blossom is made, but neither is needed and add but little to the beauty of this little blossom. Shape the petals up around the center.

The foliage for this flower can be bought, or made according to directions given elsewhere. A spray of almost any foliage will do. A small rosebud, a morning-glory or an orchid added to a bouquet of violets will make it doubly charming.

DAISIES--

Daisies may be made from one-quarter inch ribbon, using as many petals as desired. Cut the ribbon into two and one-half-inch lengths. Tie a knot in the center. Sew the ends to a small, round piece of buckram. If two rows of petals are used, the second row may be made one-quarter of an inch shorter. The center may be covered with ready-made daisy centers or a few French knots. The stem of wire is tacked to the buckram on the back and may be wound with green floss.

GERANIUMS--

These flowers are made of geranium-colored satin ribbon. Use the same method as in making violets, except that yellow stamens should always be added.

FRUIT

APPLES--

The material required for making apples is cut into a circle of any size desired and from any material. The edge should be turned in one-sixteenth of an inch and gathered all around. Place this over a piece of cotton batting, over which a piece of wire has been twisted, leaving ends long enough for a stem. Add a sufficient amount of cotton to fill the material out well. Draw the thread tight and sew. A st.i.tch may be caught through the center and pulled down, or a little tuft of brown embroidery thread sewed to the center to give a more realistic look. The apple may be tinted with water-color if desired. In that case the entire apple should be moistened first and then the color applied and allowed to dry.

CHERRIES--