The Machinery of the Universe Part 5

[Ill.u.s.tration: FIG. 6.--Thermo-pile.]

[Ill.u.s.tration: FIG. 7.--Dynamo.]

(2) When heat is the antecedent of electricity, as in the thermo-pile, that which is turned into the pile we know to be molecular motion of a definite kind. That which comes out of it must be some equivalent motion, and if all that went in were transformed, then all that came out would be transformed, call it by what name we will and let its amount be what it may.

(3) When a conductor is moved in a magnetic field, the energy spent is measurable in foot-pounds, as before, a pressure into a distance. The energy appears in a new form, but the quant.i.ty of matter being unchanged, the only changeable factor is the kind of motion, and that the motion is molecular is evident, for the molecules are heated.

Mechanical or ma.s.s motion is the antecedent, molecular heat motion is the consequent, and the way we know there has been some intermediate form is, that heat is not conducted at the rate which is observed in such a case. Call it by what name one will, some form of motion has been intermediate between the antecedent and the consequent, else we have some other factor of energy to reckon with than ether, matter and motion.

(4) In a galvanic battery, the source of electricity is chemical action; but what is chemical action? Simply an exchange of the const.i.tuents of molecules--a change which involves exchange of energy. Molecules capable of doing chemical work are loaded with energy. The chemical products of battery action are molecules of different const.i.tution, with smaller amounts of energy as measured in calorics or heat units. If the results of the chemical reaction be prevented from escaping, by confining them to the cell itself, the whole energy appears as heat and raises the temperature of the cell. If a so-called circuit be provided, the energy is distributed through it, and less heat is spent in the cell, but whether it be in one place or another, the ma.s.s of matter involved is not changed, and the variable factor is the motion, the same as in the other cases. The mechanical conceptions appropriate are the transformation of one kind of motion into another kind by the mechanical conditions provided.

[Ill.u.s.tration: FIG. 8.--Galvanic Battery.]

(5) Physiological antecedents of electricity are exemplified by the structure and mode of operation of certain muscles (Fig. 9, _a_) in the torpedo and other electrical animals. The mechanical contraction of them results in an electrical excitation, and, if a proper circuit be provided, in an electric current. The energy of a muscle is derived from food, which is itself but a molecular compound loaded with energy of a kind available for muscular transformation. Bread-and-b.u.t.ter has more available energy, pound for pound, than has coal, and can be subst.i.tuted for coal for running an engine. It is not used, because it costs so much more. There is nothing different, so far as the factors of energy go, between the food of an animal and the food of an engine. What becomes of the energy depends upon the kind of structure it acts on. It may be changed into translatory, and the whole body moves in one direction; or into molecular, and then appears as heat or electrical energy.

If one confines his attention to the only variable factor in the energy in all these cases, and traces out in each just what happens, he will have only motions of one sort or another, at one rate or another, and there is nothing mysterious which enters into the processes.

We will turn now to the mode in which electricity manifests itself, and what it can do. It may be well to point out at the outset what has occasionally been stated, but which has not received the philosophical attention it deserves--namely, that electrical phenomena are reversible; that is, any kind of a physical process which is capable of producing electricity, electricity is itself able to produce. Thus to name a few: If mechanical motion develops electricity, electricity will produce mechanical motion; the movement of a pith ball and an electric motor are examples. If chemical action can produce it, it will produce chemical action, as in the decomposition of water and electro-plating. As heat may be its antecedent, so will it produce heat. If magnetism be an antecedent factor, magnetism may be its product. What is called induction may give rise to it in an adjacent conductor, and, likewise, induction may be its effect.

[Ill.u.s.tration: FIG. 9.--Torpedo.]

[Ill.u.s.tration: FIG. 10.--Dynamo and Motor.]

Let us suppose ourselves to be in a building in which a steam-engine is at work. There is fuel, the furnace, the boiler, the pipes, the engine with its fly-wheel turning. The fuel burns in the furnace, the water is superheated in the boiler, the steam is directed by the pipes, the piston is moved by the steam pressure, and the fly-wheel rotates because of proper mechanism between it and the piston. No one who has given attention to the successive steps in the process is so puzzled as to feel the need of inventing a particular force, or a new kind of matter, or any agency, at any stage of the process, different from the simple mechanical ones represented by a push or a pull. Even if he cannot see clearly how heat can produce a push, he does not venture to a.s.sume a genii to do the work, but for the time is content with saying that if he starts with motion in the furnace and stops with the motion of the fly-wheel, any a.s.sumption of any other factor than some form of motion between the two would be gratuitous. He can truthfully say that he understands the _nature_ of that which goes on between the furnace and the wheel; that it is some sort of motion, the particular kind of which he might make out at his leisure.

Suppose once more that, across the road from an engine-house, there was another building, where all sorts of machines--lathes, planers, drills, etc.--were running, but that the source of the power for all this was out of sight, and that one could see no connection between this and the engine on the other side of the street. Would one need to suppose there was anything mysterious between the two--a force, a fluid, an immaterial something? This question is put on the supposition that one should not be aware of the shaft that might be between the two buildings, and that it was not obvious on simple inspection how the machines got their motions from the engine. No one would be puzzled because he did not know just what the intervening mechanism might be. If the boiler were in the one building, and the engine in the other with the machines, he could see nothing moving between them, even if the steam-pipes were of gla.s.s.

If matter of any kind were moving, he could not see it there. He would say there _must_ be something moving, or pressure could not be transferred from one place to the other.

Subst.i.tute for the furnace and boiler a galvanic battery or a dynamo; for the machines of the shop, one or more motors with suitable wire connections. When the dynamo goes the motors go; when the dynamo stops the motors stop; nothing can be seen to be turning or moving in any way between them. Is there any necessity for a.s.suming a mysterious agency, or a force of a _nature_ different from the visible ones at the two ends of the line? Is it not certain that the question is, How does the motion get from one to the other, whether there be a wire or not? If there be a wire, it is plain that there is motion in it, for it is heated its whole length, and heat is known to be a mode of motion, and every molecule which is thus heated must have had some antecedent motions. Whether it be defined or not, and whether it be called by one name or another, are quite immaterial, if one is concerned only with the _nature_ of the action, whether it be matter or ether, or motion or abracadabra.

Once more: suppose we have a series of active machines. (Fig. 11.) An arc lamp, radiating light-waves, gets its energy from the wire which is heated, which in turn gets its energy from the electric current; that from a dynamo, the dynamo from a steam-engine; that from a furnace and the chemical actions going on in it. Let us call the chemical actions A, the furnace B, the engine C, the dynamo D, the electric lamp E, the ether waves F. (Fig. 12.)

[Ill.u.s.tration: FIG. 11.]

The product of the chemical action of the coal is molecular motion, called heat in the furnace. The product of the heat is mechanical motion in the engine. The product of the mechanical motion is electricity in the dynamo. The product of the electric current in the lamp is light-waves in the ether. No one hesitates for an instant to speak of the heat as being molecular motion, nor of the motions of the engine as being mechanical; but when we come to the product of the dynamo, which we call electricity, behold, nearly every one says, not that he does not know what it is, but that no one knows! Does any one venture to say he does not know what heat is, because he cannot describe in detail just what goes on in a heated body, as it might be described by one who saw with a microscope the movements of the molecules? Let us go back for a moment to the proposition stated early in this book, namely, that if any body of any magnitude moves, it is because some other body in motion and in contact with it has imparted its motion by mechanical pressure.

Therefore, the ether waves at F (Fig. 11) imply continuous motions of some sort from A to F. That they are all motions of ordinary matter from A to E is obvious, because continuous matter is essential for the maintenance of the actions. At E the motions are handed over to the ether, and they are radiated away as light-waves.

[Ill.u.s.tration: FIG. 12.]

[Ill.u.s.tration: FIG. 13.]

A puzzling electrical phenomenon has been what has been called its duality-states, which are spoken of as positive and negative. Thus, we speak of the positive plate of a battery and the negative pole of a dynamo; and another troublesome condition to idealize has been, how it could be that, in an electric circuit, there could be as much energy at the most remote part as at the source. But, if one will take a limp rope, 8 or 10 feet long, tie its ends together, and then begin to twist it at any point, he will see the twist move in a right-handed spiral on the one hand, and in a left-handed spiral on the other, and each may be traced quite round the circuit; so there will be as much twist, as much motion, and as much energy in one part of the rope as in any other; and if one chooses to call the right-handed twist positive, and the left-handed twist negative, he will have the mechanical phenomenon of energy-distribution and the terminology, a.n.a.logous to what they are in an electric conductor. (Fig. 13.) Are the cases more dissimilar than the mechanical a.n.a.logy would make them seem to be?

Are there any phenomena which imply that rotation is going on in an electric conductor? There are. An electric arc, which is a current in the air, and is, therefore, less constrained than it is in a conductor, rotates. Especially marked is this when in front of the pole of a magnet; but the rotation may be noticed in an ordinary arc by looking at it with a stroboscope disk, rotated so as to make the light to the eye intermittent at the rate of four or five hundred per second. A ray of plane polarized light, parallel with a wire conveying a current, has its plane of vibration twisted to the right or left, as the current goes one way or the other through the wire, and to a degree that depends upon the distance it travels; not only so, but if the ray be sent, by reflection, back through the same field, it is twisted as much more--a phenomenon which convinces one that rotation is going on in the s.p.a.ce through which the ray travels. If the ether through which the ray be sent were simply warped or in some static stress, the ray, after reflection, would be brought back to its original plane, which is not the case. This rotation in the ether is produced by what is going on in the wire. The ether waves called light are interpreted to imply that molecules originate them by their vibrations, and that there are as many ether waves per second as of molecular vibrations per second. In like manner, the implication is the same, that if there be rotations in the ether they must be produced by molecular rotation, and there must be as many rotations per second in the ether as there are molecular rotations that produce them. The s.p.a.ce about a wire carrying a current is often pictured as filled with whorls indicating this motion (Fig. 14), and one must picture to himself, not the wire as a whole rotating, but each individual molecule independently. But one is aware that the molecules of a conductor are practically in contact with each other, and that if one for any reason rotates, the next one to it would, from frictional action, cause the one it touched to rotate in the opposite direction, whereas, the evidence goes to show that all rotation is in the same direction.

[Ill.u.s.tration: FIG. 14.]

How can this be explained mechanically? Recall the kind of action that const.i.tutes heat, that it is not translatory action in any degree, but vibratory, in the sense of a change of form of an elastic body, and this, too, of the atoms that make up the molecule of whatever sort. Each atom is so far independent of every other atom in the molecule that it can vibrate in this way, else it could not be heated. The greater the amplitude of vibration, the more free s.p.a.ce to move in, and continuous contact of atoms is incompatible with the mechanics of heat. There must, therefore, be impact and freedom alternating with each other in all degrees in a heated body. If, in any way, the atoms themselves _were_ made to rotate, their heat impacts not only would restrain the rotations, but the energy also of the rotation motion would increase the vibrations; that is, the heat would be correspondingly increased, which is what happens always when an electric current is in a conductor. It appears that the cooler a body is the less electric resistance it has, and the indications are that at absolute zero there is no resistance; that is, impacts do not r.e.t.a.r.d rotation, but it is also apparent that any current sent through a conductor at that temperature would at once heat it. This is the same as saying that an electric current could not be sent through a conductor at absolute zero.

So far, mechanical conceptions are in accordance with electrical phenomena, but there are several others yet to be noted. Electrical phenomena has been explained as molecular or atomic phenomena, and there is one more in that category which is well enough known, and which is so important and suggestive, that the wonder is its significance has not been seen by those who have sought to interpret electrical phenomena.

The reference is to the fact that electricity cannot be transmitted through a vacuum. An electric arc begins to spread out as the density of the air decreases, and presently it is extinguished. An induction spark that will jump two or three feet in air cannot be made to bridge the tenth of an inch in an ordinary vacuum. A vacuum is a perfect non-conductor of electricity. Is there more than one possible interpretation to this, namely, that electricity is fundamentally a molecular and atomic phenomenon, and in the absence of molecules cannot exist? One may say, "Electrical _action_ is not hindered by a vacuum,"

which is true, but has quite another interpretation than the implication that electricity is an ether phenomenon. The heat of the sun in some way gets to the earth, but what takes place in the ether is not heat-transmission. There is no heat in s.p.a.ce, and no one is at liberty to say, or think, that there can be heat in the absence of matter.

When heat has been transformed into ether waves, it is no longer heat, call it by what name one will. Formerly, such waves were called heat-waves; no one, properly informed, does so now. In like manner, if electrical motions or conditions in matter be transformed, no matter how, it is no longer proper to speak of such transformed motions or conditions as electricity. Thus, if electrical energy be transformed into heat, no one thinks of speaking of the latter as electrical. If the electrical energy be transformed into mechanical of any sort, no one thinks of calling the latter electrical because of its antecedent. If electrical motions be transformed into ether actions of any kind, why should we continue to speak of the transformed motions or energy as being electrical? Electricity may be the antecedent, in the same sense as the mechanical motion of a bullet may be the antecedent of the heat developed when the latter strikes the target; and if it be granted that a vacuum is a perfect non-conductor of electricity, then it is manifestly improper to speak of any phenomenon in the ether as an electrical phenomenon. It is from the failure to make this distinction that most of the trouble has come in thinking on this subject. Some have given all their attention to what goes on in matter, and have called that electricity; others have given their attention to what goes on in the ether, and have called that electricity, and some have considered both as being the same thing, and have been confounded.

Let us consider what is the relation between an electrified body and the ether about it.

When a body is electrified, the latter at the same time creates an ether stress about it, which is called an electric field. The ether stress may be considered as a warp in the distribution of the energy about the body (Fig. 15), by the new positions given to the molecules by the process of electrification. It has been already said that the evidence from other sources is that atoms, rather than molecules, in larger ma.s.ses, are what affect the ether. One is inclined to inquire for the evidence we have as to the const.i.tution of matter or of atoms. There is only one hypothesis to-day that has any degree of probability; that is, the vortex-ring theory, which describes an atom as being a vortex-ring of ether in the ether. It possesses a definite amount of energy in virtue of the motion which const.i.tutes it, and this motion differentiates it from the surrounding ether, giving it dimensions, elasticity, momentum, and the possibility of translatory, rotary, vibratory motions, and combinations of them. Without going further into this, it is sufficient, for a mechanical conception, that one should have so much in mind, as it will vastly help in forming a mechanical conception of reactions between atoms and the ether. An exchange of energy between such an atom and the ether is not an exchange between different kinds of things, but between different conditions of the same thing. Next, it should be remembered that all the elements are magnetic in some degree. This means that they are themselves magnets, and every magnet has a magnetic field unlimited in extent, which can almost be regarded as a part of itself. If a magnet of any size be moved, its field is moved with it, and if in any way the magnetism be increased or diminished, the field changes correspondingly.

[Ill.u.s.tration: FIG. 15.]

a.s.sume a straight bar electro-magnet in circuit, so that a current can be made intermittent, say, once a second. When the circuit is closed and the magnet is made, the field at once is formed and travels outwards at the rate of 186,000 miles per second. When the current stops, the field adjacent is destroyed. Another closure develops the field again, which, like the other, travels outwards; and so there may be formed a series of waves in the ether, each 186,000 miles long, with an electro-magnetic antecedent. If the circuit were closed ten times a second, the waves would be 18,600 miles long; if 186,000 times a second, they would be but one mile long. If 400 million of millions times a second, they would be but the forty-thousandth of an inch long, and would then affect the eye, and we should call them light-waves, but the latter would not differ from the first wave in any particular except in length. As it is proved that such electro-magnetic waves have all the characteristics of light, it follows that they must originate with electro-magnetic action, that is, in the changing magnetism of a magnetic body. This makes it needful to a.s.sume that the atoms which originate waves are magnets, as they are experimentally found to be. But how can a magnet, not subject to a varying current, change its magnetic field? The strength or density of a magnetic field depends upon the form of the magnet. When the poles are near together, the field is densest; when the magnet is bent back to a straight bar, the field is rarest or weakest, and a change in the form of the magnet from a U-form to a straight bar would result in a change of the magnetic field within its greatest limits. A few turns of wire--as has been already said--wound about the poles of an ordinary U-magnet, and connected to an ordinary magnetic telephone, will enable one, listening to the latter, to hear the pitch of the former loudly reproduced when the magnet is struck like a tuning-fork, so as to vibrate. This shows that the field of the magnet changes at the same rate as the vibrations.

a.s.sume that the magnet becomes smaller and smaller until it is of the dimensions of an atom, say for an approximation, the fifty-millionth of an inch. It would still have its field; it would still be elastic and capable of vibration, but at an enormously rapid rate; but its vibration would change its field in the same way, and so there would be formed those waves in the ether, which, because they are so short that they can affect the eye, we call light. The mechanical conceptions are legitimate, because based upon experiments having ranges through nearly the whole gamut as waves in ether.

The idea implies that every atom has what may be loosely called an electro-magnetic grip upon the whole of the ether, and any change in the former brings some change in the latter.

Lastly, the phenomenon called induction may be mechanically conceived.

It is well known that a current in a conductor makes a magnet of the wire, and gives it an electro-magnetic field, so that other magnets in its neighbourhood are twisted in a way tending to set them at right angles to the wire. Also, if another wire be adjacent to the first, an electric current having an opposite direction is induced in it. Thus:

Consider a permanent magnet A (Fig. 15), free to turn on an axis in the direction of the arrow. If there be other free magnets, B and C, in line, they will a.s.sume such positions that their similar poles all point one way. Let A be twisted to a position at right angles, then B will turn, but in the opposite direction, and C in similar. That is, if A turn in the direction of the hands of a clock, B and C will turn in opposite directions. These are simply the observed movements of large magnets. Imagine that these magnets be reduced to atomic dimensions, yet retaining their magnetic qualities, poles and fields. Would they not evidently move in the same way and for the same reason? If it be true, that a magnet field always so acts upon another as to tend by rotation to set the latter into a certain position, with reference to the stress in that field, then, _wherever there is a changing magnetic field, there the atoms are being adjusted by it_.

[Ill.u.s.tration: FIG. 16.]

Suppose we have a line of magnetic needles free to turn, hundreds or thousands of them, but disarranged. Let a strong magnetic field be produced at one end of the line. The field would be strongest and best conducted along the magnet line, but every magnet in the line would be compelled to rotate, and if the first were kept rotating, the rotation would be kept up along the whole line. This would be a mechanical ill.u.s.tration of how an electric current travels in a conductor. The rotations are of the atomic sort, and are at right angles to the direction of the conductor.

That which makes the magnets move is inductive magnetic ether stress, but the advancing motion represents mechanical energy of rotation, and it is this motion, with the resulting friction, which causes the heat in a conductor.

What is important to note is, that the action in the ether is not electric action, but more properly the result of electro-magnetic action. Whatever name be given to it, and however it comes about, there is no good reason for calling any kind of ether action electrical.

Electric action, like magnetic action, begins and ends in matter. It is subject to transformations into thermal and mechanical actions, also into ether stress--right-handed or left-handed--which, in turn, can similarly affect other matter, but with opposite polarities.

In his _Modern Views of Electricity_, Prof. O. J. Lodge warns us, quite rightly, that perhaps, after all, there is no such _thing_ as electricity--that electrification and electric energy may be terms to be kept for convenience; but if electricity as a term be held to imply a force, a fluid, an imponderable, or a thing which could be described by some one who knew enough, then it has no degree of probability, for spinning atomic magnets seem capable of developing all the electrical phenomena we meet. It must be thought of as a _condition_ and not as an ent.i.ty.

THE END

_Richard Clay & Sons, Limited, London & Bungay._

PUBLICATIONS

OF THE

Society for Promoting Christian Knowledge.