Manual of Military Training Part 41

In rendering honors with troops, officers execute the first motion of the salute at the command =present=, the second motion at the command =arms=; enlisted men with the saber execute the first motion at the command arms and omit the second motion. (784)

=674. Coming to order from carry; executing order or carry from present, depending upon command; coming to order saber when arms are brought to order.=

Being at a carry: =1. Order, 2. SABER= (or =ARMS=).

Drop the point of the saber directly to the front, point on or near the ground, edge down, thumb on back of grip.

Being at the =present saber=, should the next command be =order arms=, officers and noncommissioned officers armed with the saber =order saber=; if the command be other than =order arms=, they execute =carry saber=.

When arms are brought to the order, the officers or enlisted men with saber drawn =order saber=. (785)

=675. Position of saber in giving commands, etc.; bringing saber to carry from order.= The saber is held at the carry while giving commands, marching at attention, or changing position in quick time.

When at the order, sabers are brought to the carry when arms are brought to any position except the =present= or =parade rest=. (786)

=676. Parade rest from order.= Being at the order: =1. Parade, 2.

REST.=

Take the position of parade rest except that the left hand is uppermost and rests on the right hand, point of saber on or near the ground in front of the center of the body, edge to the right.

At the command =attention=, resume the order saber and the position of the soldier. (787)

=677. Position of saber at double time.= In marching in double time the saber is carried diagonally across the breast, edge to the front; the left hand steadies the scabbard. (788)

=678. On duty under arms sabers to be drawn and returned without command; commands given with saber drawn.= Officers and noncommissioned officers armed with the saber, on all duties under arms draw and return saber without waiting for command. All commands to soldiers under arms are given with the saber drawn. (789)

=679. Returning saber from carry.= Being at a carry: =1. Return, 2.

SABER.=

At the command =return=, carry the right hand opposite to and 6 inches from the left shoulder, saber vertical, edge to the left; at the same time unhook and lower the scabbard with the left hand and grasp it at the upper band.

At the command =saber= drop the point to the rear and pa.s.s the blade across and along the left arm; turn the head slightly to the left, fixing the eyes on the opening of the scabbard, raise the right hand, insert and return the blade; free the wrist from the saber knot (if inserted in it), turn the head to the front, drop the right hand by the side; hook up the scabbard with the left hand, drop the left hand by the side.

Officers and noncommissioned officers armed with the saber, when mounted, return saber without using the left hand; the scabbard is hooked up on dismounting. (790)

=680. Enlisted men with saber drawn at inspection.= At inspection enlisted men with the saber drawn execute the first motion of =present saber= and turn the wrist to show both sides of the blade, resuming the carry when the inspector has pa.s.sed. (791)

[Ill.u.s.tration]

Shelter Tents

=681.= Being in line or in column of platoons, the captain commands: =FORM FOR SHELTER TENTS.=

The officers, first sergeant, and guides fall out; the cooks form a file on the flank of the company nearest the kitchen, the first sergeant and right guide fall in, forming the right file of the company; blank files are filled by the file closers, or by men taken from the front rank; the remaining guide, or guides, and file closers form on a convenient flank.

Before forming column or platoons, preparatory to pitching tents, the company may be redivided into two or more platoons, regardless of the size of each. (792)

=682.= The captain then causes the company to take intervals as described in the School of the Squad (See par. 156.), and commands: =PITCH TENTS.=

At the command =pitch tents=, each man steps off obliquely to the right with the right foot and lays his rifle on the ground, the b.u.t.t of the rifle near the toe of the right foot, muzzle to the front, barrel to the left, and steps back into his place; each front-rank man then draws his bayonet and sticks it in the ground by the outside of the right heel.

Equipments are unslung, packs opened, shelter half and pins removed; each man then spreads his shelter half, small triangle to the rear, flat upon the ground the tent is to occupy, the rear-rank man's half on the right. The halves are then b.u.t.toned together; the guy loops at both ends of the lower half are pa.s.sed through the b.u.t.tonholes provided in the lower and upper halves; the whipped end of the guy rope is then pa.s.sed through both guy loops and secured, this at both ends of the tent. Each front-rank man inserts the muzzle of his rifle under the front end of the ridge and holds the rifle upright, sling to the front, heel of b.u.t.t on the ground, beside the bayonet. His rear-rank man pins down the front corners of the tent on the line of bayonets, stretching the tent taut; he then inserts a pin in the eye of the front guy rope and drives the pin at such a distance in front of the rifle as to held the rope taut; both men go to the rear of the tent, each pins down a corner, stretching the sides and rear of the tent before securing; the rear-rank man then inserts an intrenching tool, or a bayonet in its scabbard, under the rear end of the ridge inside the tent, the front-rank man pegging down the end of the rear guy ropes; the rest of the pins are then driven by both men, the rear-rank man working on the right.

The front flaps of the tent are not fastened down, but thrown back on the tent.

As soon as the tent is pitched each man arranges his equipment and the contents of his pack in the tent and stands at attention in front of his own half on line with the front guy-rope pin.

To have a uniform slope when the tents are pitched, the guy ropes should all be of the same length.

In shelter-tent camps, in localities where suitable material is procurable, tent poles may be improvised and used in lieu of the rifle and bayonet or intrenching tool as supports for the shelter tent.

(793)

=683.= When the pack is not carried, the company is formed for shelter tents, as prescribed in par. 681, intervals are taken, arms are laid aside or on the ground, the men are dismissed and proceed to the wagon, secure their packs, return to their places, and pitch tents as heretofore described, in par. 682. (794)

=684.= Double shelter tents may be pitched by first pitching one tent as heretofore described, then pitching a second tent against the opening of the first, using one rifle to support both tents, and pa.s.sing the front guy ropes over and down the sides of the opposite tents. The front corner of one tent is not pegged down, but is thrown back to permit an opening into the tent. (795)

Single Sleeping Bag

=685.= Spread the poncho on the ground, b.u.t.toned end at the feet, b.u.t.toned side to the left; fold the blanket once across its short dimension and lay it on the poncho, folded side along the right side of the poncho; tie the blanket together along the left side by means of the tapes provided; fold the left half of the poncho over the blanket and b.u.t.ton it together along the side and bottom. (For the position, number, and length of tapes with which blankets should be provided, see Par. II, G. O. 11; W. D. '12--Author.) (796)

Double Sleeping Bag

=686.= Spread one poncho on the ground, b.u.t.toned end at the feet, b.u.t.toned side to the left; spread the blankets on top of the poncho; tie the edges of the blankets together with the tapes provided; spread a second poncho on top of the blankets, b.u.t.toned end at the feet, b.u.t.toned side to the right; b.u.t.ton the two ponchos together along both sides and across the end. (797)

To Strike Shelter Tents

=687.= The men standing in front of their tents: =STRIKE TENTS.=

Equipments and rifles are removed from the tent; the tents are lowered, packs made up, and equipments slung, and the men stand at attention in the places originally occupied after taking intervals.

(798)

To Pitch All Types of Tents, Except Shelter and Conical Wall

=688.= To pitch all types of Army tents, except shelter and conical wall tents: Mark line of tents by driving a wall pin on the spot to be occupied by the right (or left) corner of each tent. For pyramidal tents the interval between adjacent pins should be about 30 feet, which will give a pa.s.sage of two feet between tents. Spread tripod on the ground where the center of tent is to be, if tripod is used.

Spread the tent on the ground to be occupied, door to the front, and place the right (or left) front wall loop over the pin. The door (or doors, if more than one) being fastened and held together at the bottom, the left (or right) corner wall loop is carried to the left (or right) as far as it will go and a wall pin driven through it, the pin being placed in line with the right (or left) corner pins already driven. At the same time the rear corner wall loops are pulled to the rear and outward so that the rear wall of the tent is stretched to complete the rectangle. Wall pins are then driven through these loops.

Each corner pin should be directly in rear of the corresponding front corner pin, making a rectangle. Unless the canvas be wet, a small amount of slack should be allowed before the corner pins are driven.

According to the size of the tent one or two men, crawling under the tent if necessary, fit each pole or ridge or upright into the ring or ridge pole holes, and such accessories as hood, fly, and brace ropes are adjusted. If a tripod be used an additional man will go under the tent to adjust it. The tent steadied by the remaining men, one at each corner guy rope, will then be raised. If the tent is a ward or storage type, corner poles will now be placed at the four corners. The four corner guy ropes are then placed over the lower notches of the large pins driven in prolongation of the diagonals at such distance as to hold the walls and ends of the tent vertical and smooth when the guy ropes are drawn taut. A wall pin is then driven through each remaining wall loop and a large pin for each guy rope is driven in line with the corner guy pins already driven. The guy ropes of the tent are placed over the lower notches, while the guy ropes of the fly are placed over the upper notches, and are then drawn taut. Brace ropes when used, are then secured to stakes or pins suitably placed. (709)

Conical Wall Tent

=689.= Drive the door pin and center pin 8 feet 3 inches apart. Using the hood lines, with center pin as center, describe two concentric circles with radii 8 feet 3 inches and 11 feet 3 inches. In the outer circle drive two door guy pins 3 feet apart. At intervals of about 3 feet drive the other guy pins.