A Trip to California in 1853 Part 5

I will now give you a description of the gold region where gold was found, where I traveled and where I mined.

The McCosma River headed up toward the summit of the Sierra Nevada Mountains toward the northeast and runs a little southwest until it empties into the Sacramento River. Gold was found in what were called bars, that is, where rock, gravel and sand had lodged on either side, or across the river. Some of these bars would be very rich in gold.

There were, also, what were called gulches, running out from the river on either side. They often headed the valleys. These gulches ran out between mountains and when they headed pretty well up toward the top of a large mountain, that divided the rivers, into what were called ravines. All of these ravines would have gold in them. The bed rock would raise up on both sides and the lowest place in this bed rock, was called the lead. Some would be richer in gold than others, taking the name of rich lead or poor lead. Often there were places up on the sides of the mountains where the bed rock was almost bare, and in these places were cracks or seams down in the bed rock, where the gold would be found mixed with sand and dirt.

When the first miners came, they did not know how to save the gold and they had no tools to work with. They used their jackknives to dig the gold out of these crevises and carried it in their pans to where there was water and washed out the dirt and sand. When the miners had picks and shovels, they made rockers. They were made just like the rocking beds of the old fas.h.i.+oned kind to rock babies in, only one end was out, except about two inches at the bottom, for what they called a riffle, to lodge the gold against. They put another of these riffles up higher in the rocker for the same purpose. They made a box four square that set on top of this rocker with a sheet iron bottom with round holes punched in it to let the gold and sand through. They would then fill this box with pay dirt, dip water from the creek or river, and pour it in on the pay dirt with one hand and rock with the other. They would then gather up the gold and what little sand remained from behind the riffles, place it in their pans and wash it out, leaving nothing but the gold and some black sand.

Another plan used and a better and faster method, was to use what they called the long tom. This was made of plank on the sides about six feet long and three feet wide. The planks were cut curved on the lower end, so that the sheet iron with the holes in it, would turn upward. The upper end of the tom, was made of planks sawed sloping and drawn in until it was wide enough to lay their water hose in, which furnished the water for was.h.i.+ng.

When they washed the gold with pans, they would throw all the top dirt away until they got down deep enough to find it sufficiently rich to pay, then they would pan out the rest of the dirt to the bed rock.

When we mined in California, we washed with sluice boxes, whenever we could get plenty of water. Sluice boxes were made by sawing the bottom board two inches narrower at one end than at the other so we could place the end of every box in the upper end of the next box. We had slats nailed across the top of the boxes to keep them from spreading. There were slats for riffles, two and a half or three inches wide, fitted down tight on the bottom, for the gold to lodge against. The gold, with the sand and dirt would then be removed and panned out as in the other methods mentioned above.