Industrial Arts Design - BestLightNovel.com
You’re reading novel Industrial Arts Design Part 21 online at BestLightNovel.com. Please use the follow button to get notification about the latest chapter next time when you visit BestLightNovel.com. Use F11 button to read novel in full-screen(PC only). Drop by anytime you want to read free – fast – latest novel. It’s great if you could leave a comment, share your opinion about the new chapters, new novel with others on the internet. We’ll do our best to bring you the finest, latest novel everyday. Enjoy
(_A_) _Zone of Enrichment_: In the margin.
_Reason for Choice_: Central area to be devoted to zone of service requiring simplicity in design.
[Sidenote: Marginal Enrichment]
_Type of Design_: Bands or borders.
_Inceptive Axis_: For corners; the bisector of the angle.
_Points of Concentration_: The corners and, if desired, at equal intervals between the corners.
_Ill.u.s.trations_: Figures 283, 284, 286, 287, 288.
(_B_) _Zone of Enrichment_: center of surface, free ornament.
[Sidenote: Center Enrichment]
_Type of Design_: Initials, monograms, street numbers, geometric patterns, and other examples for free ornament. A star or diamond is _not_ appropriate enrichment for a square area unless properly related to the contour by connecting areas.
_Inceptive Axes_: Vertical or horizontal diameters or diagonals.
_Points of Concentration_: Center of embellishment.
_Ill.u.s.trations_: Figure 285.
[Ill.u.s.tration: SURFACE ENRICHMENT OF CLAY
HIGH CYLINDRICAL FORMS. VASES, PITCHERS, ETC
PLATE 50]
(_C_) _Zone of Enrichment_: full surface enrichment in a horizontal position.
_Type of Design_: A symmetrical pattern generally radiating from the geometric center of the surface and covering at least two-thirds of the surface.
[Sidenote: Full Vertical Surface Enrichment]
_Inceptive Axes_: Diameters or diagonals of the area.
_Points of Concentration_: At the corners or the center of the outer margin; at geometric center, as in a rosette.
_Ill.u.s.trations_: Figures 283, 289, and 291.
[Sidenote: Full Horizontal Surface Enrichment]
(_D_) _Zone of Enrichment_: full surface enrichment in a vertical position.
_Type of Design_: A symmetrical pattern with a strong upward movement and covering more than one-half of the surface.
_Inceptive Axis_: The vertical center line.
_Point of Concentration_: Upper section of the surface.
_Ill.u.s.trations_: Figures 290 and 292.
[Sidenote: Free Balance]
(_E_) _Zone of Enrichment_: free balance over full surface.
_Type of Design_: Semi-decorative motive preferably covering the entire surface.
_Inceptive Axis_: Ma.s.ses freely balanced over the geometric center of the area.
_Point of Concentration_: Near, but not in the exact center.
_Ill.u.s.trations_: Figures 293, 294, 295, 296, 297, 298.
_Note_: The points of concentration should be accented by slight contrast of value and hue. See chapters on color.
[Sidenote: Shallow Circular Forms, Plate 48]
_Problems_: Plates, saucers, ash trays, card receivers, almond and candy bowls.
(_A_) _Zone of Enrichment_: margin of interior surface; margin of exterior surface.
_Type of Design_: Bands or borders thoroughly related to the structural contours. Bands for exterior enrichment may be placed directly on the contour, Figures 299 and 301, thus forming an
[Ill.u.s.tration: APPLIED AND CONSTRUCTIVE DESIGN
RULE 9: ENRICHMENT OF THE PRIMARY Ma.s.s BY A BORDER
PROBLEM: ENRICHMENT OF CLa.s.s 2 (POTTERY)
PLATE 51.--Instruction Sheet]
[Sidenote: Marginal Enrichment]
