Illustrated Catalogue of Cotton Machinery - BestLightNovel.com
You’re reading novel Illustrated Catalogue of Cotton Machinery Part 5 online at BestLightNovel.com. Please use the follow button to get notification about the latest chapter next time when you visit BestLightNovel.com. Use F11 button to read novel in full-screen(PC only). Drop by anytime you want to read free – fast – latest novel. It’s great if you could leave a comment, share your opinion about the new chapters, new novel with others on the internet. We’ll do our best to bring you the finest, latest novel everyday. Enjoy
G1 Small Double Intermediate, driving Third Calender Roll 27 T.
G2 Bottom Calender Roll, 7 in. dia.
H 3d Calender Roll Gear, 21 T.
H1 3d Calendar Roll, 5-1/2 in. dia.
I 2d Calender Roll Gear, 22 T.
I1 2d Calender Roll, 5-1/2 in. dia.
J Top Calender Roll Gear, 23 T.
J1 Top Calender Roll, 5-1/2 in. dia.
K Top Stripping Roll Intermediate Gear, 17 T.
K1 Top Stripping Roll Intermediate Gear, 17 T.
L Top Stripping Roll Gear, 14 T.
{48}
M Bottom Stripping Roll Gear, 14 T.
M1 Bottom Cage Driving Gear, 23 T.
N Bottom Cage Intermediate Gear, 20 T.
O Bottom Cage Gear, 181 T.
O1 Top Cage Gear, 181 T.
P Bottom Cone Change Gear, 35-55 T; advancing by one tooth.
P1 Bottom Cone, driving Top Cone. Letters also represent diameters near the middle of Cones.
Q Top Cone.
Q1 Worm Shaft Driving Spiral Gear, 9 T.
R Worm Shaft Spiral Gear, 9 T.
R1 Worm Shaft Worm, double threaded, right hand; equivalent to Gear having two teeth.
S Worm Gear, 78 T.
S1 Feed Roll and Ap.r.o.n Roll Driving Gear, 12 T.
T Feed Roll, 3 in. dia.
T1 Feed Roll Gear, 24 T.
U Ap.r.o.n Roll Gear, 29 T.
V Front Lap Calender Roll, 9 in. dia.
V1 Front Lap Calendar Roll Gear, 53 T.
V2 Back Lap Calendar Roll Driving Gear, 24 T.
W Back Lap Calender Roll Intermediate Gear, 22 T.
X Back Lap Calender Roll Gear, 24 T.
X1 Back Lap Calender Roll, 9 in. dia.
{49}
INTERMEDIATE AND FINISHER LAPPERS.
DRAFT CALCULATIONS.
[Ill.u.s.tration]
{50}
PRODUCTION CALCULATIONS.
[Ill.u.s.tration]
NOTE--With our latest gearing arrangement, the number of teeth in Knock-off Worm Gear corresponds to the number of yards in the lap.
{51}
INTERMEDIATE AND FINISHER LAPPERS.
DRAFT TABLE.
[Ill.u.s.tration]
{52}
[Ill.u.s.tration]
AUTOMATIC HOPPER FEEDER
{53}
[Ill.u.s.tration]
SELF-FEEDING OPENER (30-IN. CYLINDER) WITH CAGE SECTION AND CALENDER HEAD
{54}
[Ill.u.s.tration]
SELF-FEEDING OPENER (30-IN. CYLINDER) AND SINGLE BEATER BREAKER LAPPER
{55}
[Ill.u.s.tration]
SELF-FEEDING OPENER (18-IN. BEATER) AND SINGLE BEATER BREAKER LAPPER
{56}
[Ill.u.s.tration]
SELF-FEEDING OPENER (18-IN. BEATER) CONNECTED BY TRUNKING TO A SINGLE BEATER BREAKER LAPPER WITH GAUGE BOX AND CONDENSER
{57}
[Ill.u.s.tration]
SELF-FEEDING OPENER (30-IN. CYLINDER) CONNECTED BY TRUNKING TO A SINGLE BEATER BREAKER LAPPER WITH GAUGE BOX AND CONDENSER
{58}
[Ill.u.s.tration]
SINGLE BEATER INTERMEDIATE OR FINISHER LAPPER
{59}
[Ill.u.s.tration]
THREE-PROCESS SYSTEM OF PICKING WITH 20 FT. OF AUTOMATIC CLEANING TRUCK ALSO CONDUCTING TRUNK BETWEEN OPENER AND BREAKER
