Shelters, Shacks and Shanties - BestLightNovel.com
You’re reading novel Shelters, Shacks and Shanties Part 11 online at BestLightNovel.com. Please use the follow button to get notification about the latest chapter next time when you visit BestLightNovel.com. Use F11 button to read novel in full-screen(PC only). Drop by anytime you want to read free – fast – latest novel. It’s great if you could leave a comment, share your opinion about the new chapters, new novel with others on the internet. We’ll do our best to bring you the finest, latest novel everyday. Enjoy
[Ill.u.s.tration: The lean-to and one-pen cabin plan.]
The Bunks
The bunks are made by setting the ends of two poles into holes in the logs bored for that purpose (Fig. 185) and nailing slats across the poles. Over this a bed of browse is laid and on this blankets are spread and all is then ready for bedtime.
x.x.x
THE NORTHLAND TILT AND INDIAN LOG TENT
Log Tents
SOME years ago in the north country the Indians built themselves log tents like the one shown in Fig. 187. These were the winter houses in the north country. A ridge-pole was set up on two forked sticks and the logs slanted up against each other and rested upon that pole. Smaller poles were then laid up against this frame, both front and rear, all of which could then be covered with sod or browse and made into a warm winter house. My boy readers may build a similar house by using small poles instead of big logs, or they may make a "northland tilt" (Fig. 189), which is a modification of the Indian's log tent and has two side-plates (Fig. 188) instead of one ridge-pole. The log chimney is also added, and when this is connected with a generous fireplace the fire will brighten and warm the interior of the tilt and make things comfortable. The chimney may be made by first building a fireplace of sod or stone, as shown in Figs. 269 and 270, on top of which a chimney can be erected in the same manner that you build a log house.
Fig. 187. Fig. 188. Fig. 189.
[Ill.u.s.tration: Log tilts of the North.]
The front of the northland tilt is faced in with small logs set on end, as shown in the unfinished one (Fig. 189); this makes a substantial, warm winter camp. If the logs fit close together on the roof they may be calked with moss and dry gra.s.s. If the cracks are too wide on account of the unevenness of the log, cover them first with gra.s.s, fine brush, or browse and over all place a coating of sod or mud and you will have a house fit for a king to live in. To tell the truth, it is much too good for a mere king and almost good enough for a real American boy--that is, if anything is good enough for such a lad.
CHAPTER x.x.xI
HOW TO BUILD THE RED JACKET, THE NEW BRUNSWICK, AND THE CHRISTOPHER GIST
THE "Red Jacket" is another camp; but this, you see, has straight walls, marking it as _a white man's camp_ in form not apparently borrowed from the red men. It is, however, a good, comfortable, rough camp and Figs. 190 and 191 show how it was evolved or grew. To build the Red Jacket one will first have to know how to build the more simple forms which we call the New Brunswick, then the next step will be the Christopher Gist, and last the Red Jacket. We will now begin with the New Brunswick.
The New Brunswick
By referring to Fig. 190 you will see that it is practically a deep, Adirondack, open-face camp with a wind-s.h.i.+eld built in front of it. To build this camp, make the plan about six feet by twelve on the ground; of course the back logs must be something over six feet long to allow for six feet in the clear. Notch about four or five back logs with the plain, rounded notch already described and ill.u.s.trated by Fig. 165. Then lay the side sill logs and erect two upright forked sticks for the front of your cabin to hold the cross stick which supports the roof rafter. Now build up your cabin as you would a log house, notching only the small ends of the side logs and saving the larger ends for the front; between each of these c.h.i.n.k with other logs shaped to fit the s.p.a.ces or with pieces of other logs so as to make the front higher than the rear. When the logs meet the rafter pole all the cracks are c.h.i.n.ked up with small pieces of wood and the crevices calked with moss. Then the roof of bark is put on, s.h.i.+ngled as described for the Pontiac, and ill.u.s.trated by Figs. 36 and 190 _A_. The bark is kept in place by laying sticks or poles over it to weight it down, as may be seen by the plan of the roof (Fig. 190 _A_), which is supposed to be the way the unfinished roof would look to you if you were looking down upon it from the branch of a tree or an aeroplane. After you have your open-faced camp finished take some green logs from the fir-trees if they are handy and split them in half by one of the methods shown by Fig.
119. Then leaving enough room for a pa.s.sageway, erect your wind-s.h.i.+eld of green logs, resting them against a pole laid between two forked sticks. Be sure you have the green, split side of the log facing the camp and the bark side facing outdoors, because the green wood will not burn readily; and as the camp-fire is built close to the wind-s.h.i.+eld, if the s.h.i.+eld is made of very inflammable material it will soon burn down. Some woods, you know, burn well when green and some woods must be made dry before we can use them for fuel; but the wood we want for the fire-s.h.i.+eld is the sort that will not burn readily; the good-burning woods we save to use in our fire.
Christopher Gist
The next camp is the Christopher Gist, named after George Was.h.i.+ngton's camping friend. This camp, as you may see by Fig. 191, is built like a New Brunswick except that the side sill logs are much longer as is also the log which extends over the doorway. Then, in place of having a wind-s.h.i.+eld built by itself, the wind-s.h.i.+eld in Fig. 191 is the other end of the cabin built just the same as the rear end, but it should be built of peeled logs as they are less liable to catch afire than the ones with the bark upon them. If you feel real lazy it will only be necessary to peel the bark off from the inside half of the log. Above the door at the end of the roof of the Adirondack camp part of the s.p.a.ce is filled by logs running across, with the lower one resting upon the top of the door-jamb; this closes the shed above the wind-s.h.i.+eld and leaves a little open yard in front wherein to build your camp-fire.
Fig. 190. Fig. 190A. Fig. 191. Fig. 192.
[Ill.u.s.tration: The stages in the evolution of a log cabin.]
The Red Jacket
The Red Jacket continues the suggestion offered by the Christopher Gist and extends the side walls all the way across to the wind-s.h.i.+eld, and the latter now becomes the true end of the log shack. The side walls and end wall are built up from the top of the shack to form a big, wide log chimney under which the open camp-fire is built on the ground. The Red Jacket is roofed with bark in the same manner as the New Brunswick and Christopher Gist and occupies the important position of the missing link between the true log cabin or log house and the rude log camp of the hunter. If you will look at Fig. 184, the open-faced log camp; then Fig.
190, the camp with the wind-s.h.i.+eld in front of it; then Fig. 191 with the wind-s.h.i.+eld enclosed but still open at the top; then 192 where the wind-s.h.i.+eld has turned into a fireplace with a chimney; then Figs. 271 and 273, showing the ends of the real log cabin, you will have all the steps in the growth or evolution which has produced the American log house.
x.x.xII
CABIN DOORS AND DOOR-LATCHES, THUMB-LATCHES AND FOOT LATCHES AND HOW TO MAKE THEM
PERHAPS my reader has noticed that, although many of the descriptions of how to build the shacks, shanties, shelters, camps, sheds, tilts, and so forth are given with somewhat minute details, little or nothing has been said regarding the doors and door-latches. Of course we have no doors on the open Adirondack camp, but we have pa.s.sed the open camps now and are well into cabin work, and all cabins have some sort of a door. All doors have, or should have, some sort of a door-latch, so the doors and door-latches have been saved for this place in the book, where they are sandwiched between the log cabin and the log houses proper, which is probably the best place for them. The "gummers" who collect spruce gum in the north woods and the trappers and all of the hermit cla.s.s of woodsmen frequently come home to their little shack with their hands full of traps or with game on their shoulders, and consequently they want to have a door which may be opened without the necessity of dropping their load, and so they use a foot latch.
Foot Latch
One of the simplest of the foot latches consists of a piece of wood cut out by the aid of axe and hunting-knife to the form shown by Fig. 199; a hole in the door cut for that purpose admits the flattened and notched end and upon the inside it fits the round log sill. The owner of the shack, when reaching home, steps upon the foot latch (Fig. 199), which lifts up the catch (on the inside) and allows the door to swing open.
Trigger Latch
Fig. 200 shows a more complicated form of latch with a trigger protruding from the lower part of the door, which is hinged to a wooden shaft, and the shaft in turn is connected with the latch. The fastenings of the trigger to the shaft and the shaft to the latch are made with hardwood pegs or wire nails which move freely in their sockets. The latch is the simplest form of a wooden bar fastened at one end with a screw or nail on which it can move up and down freely; the other end is allowed to drop into the catch. The latch itself is similar to the one shown in Figs. 193 and 194. The trigger is also fastened to a block on the outside of the door by a nail or peg upon which it moves freely, so that when the weight of the foot is placed upon the trigger outside the door that end is forced down which pushed the end attached to the shaft up; this pushes the shaft up and the shaft pushes _the latch up_; thus the door is unfastened. The diagram to the left in Fig. 200 shows the edge of the door with the trigger on the outside, the shaft upon the inside. The diagram to the right in Fig. 200 shows the inside of the door, the end of the trigger, the shaft, the latch, and the catch.
The Latch-String
In the preceding locks and fastenings, no matter how generous and hospitable the owner may be, his latch-string never "hangs on the outside," but in this one the latch-string literally hangs outside and any one may enter by pulling it (Figs. 193 and 194). But when the owner is in and does not want to be interrupted he pulls the string in, which tells the outsider that he must knock before he can be admitted. This simplest form of latch has been here put upon the simplest form of a door, a door with a wooden hinge made by nailing a round rod to the edge of the door and allowing the ends of the rod to project above and below the door. In the sill log below the door a hole about two inches deep is bored to receive the short end of the hinge rod; above a deeper hole is bored to receive the long end of the hinge rod. To hang the door run the long end up in the top hole far enough to lift the door sufficiently to be able to drop the lower end of the hinge rod in the lower hole. Your door is then hung and may swing back and forth at your pleasure. Notwithstanding the fact that such a door admits plenty of cold air, it is a very popular door for camps and is even used for log houses.
Fig. 193. Fig. 194. Fig. 195. Fig. 196. Fig. 197. Fig. 198.
Fig. 199. Fig. 200.
[Ill.u.s.tration: Foot and thumb door-latches.]
Simple Spring-Latch
A simple form of spring-latch is shown by Fig. 196, as you may see, _A_ is a peg driven into the door-jamb. It has a notch in it's outer end so that _B_, a piece of hickory, may be sprung into the notch; _B_ is fastened to the door by a couple of screws. By pus.h.i.+ng the door the latch will slide out of the rounded notch and the door opens. When you pull the door to close it the end of the spring strikes the rounded end of the _A_ peg and, sliding over it, drops naturally into the slot and holds the door closed.
This form of latch is also a good one for gates.
Better Spring-Latch
Figs. 197 and 198 show more complicated spring-latches but this latch is not so difficult to make as it may appear in the diagram. _A_ and _D_ (197) show, respectively, the wooden catch and the guard confining the latch. _C_ is another guard made, as you may observe, from a twig with a branch upon it; the twig is split in half and fastened at the base with two screws, and at the upper end, where the branch is bent down, is fastened with one screw. A guard like the one shown by _D_ (Fig. 197) would answer the purpose, but I am taking the latch as it was made. The lower diagram (Fig. 198) shows a side view of the edge of the door with two cotton spools fastened at each end of the stick which runs through a slot in the door. _E_ is the cotton spool on the outside of the door and _F_ the cotton spool on the inside of the door. The upper left-hand diagram (Fig. 198) shows the slot in the door and the spool as it appears from the outside. _B_ (Fig. 197) is the spring-latch which is held in place by the spool _F_. The stick or peg which runs through the spools and the slot also runs through a hole made for that purpose in the spring-latch, as shown at _F_ (Fig. 197). After the stick with the _E_ spool on it has been run through the slot from the outside of the door, thence through the spring-latch _B_ and into the spool _F_, it is fastened there by driving around its end some thin wedges of wood or by allowing it to protrude and running a small peg through the protruding end, as shown by _F_, _G_ (Fig. 197, lower diagram). The thin, springy end of your latch is now forced down by a peg or nail in the door at _H_ (Fig. 197) and the tail end of it forced up by a peg or nail at _K_. When this is done properly it will give considerable spring to the latch and impart a decided tendency to force the latch into the wooden catch, a tendency which can only be overcome by lifting the spool up in the slot and thus lifting the latch and allowing the door to open. Fig. 197 shows the inside of the door with the spring-latch, catches and all complete; it also gives details of the wooden catch _A_ with guards _D_ and _C_ and the fastening of the stick in the spool by a peg driven through the end of the stick at _F_, _G_. This last one is a good jack-knife latch to make for your camp or cabin.