The Modern Pistol and How to Shoot It - BestLightNovel.com
You’re reading novel The Modern Pistol and How to Shoot It Part 35 online at BestLightNovel.com. Please use the follow button to get notification about the latest chapter next time when you visit BestLightNovel.com. Use F11 button to read novel in full-screen(PC only). Drop by anytime you want to read free – fast – latest novel. It’s great if you could leave a comment, share your opinion about the new chapters, new novel with others on the internet. We’ll do our best to bring you the finest, latest novel everyday. Enjoy
It is self-evident that if you want anything to be as visible as possible you paint it white.
White reflects light better than any colour. If you distribute twenty white, thirty yellow, fifty red, and eighty blue spots over a piece of black paper they look to the eye as being of equal numbers, owing to the blue being so inconspicuous compared with the red, the red compared with yellow, and the yellow compared with the white.
[Ill.u.s.tration: PLATE 13. UNITED STATES ARMY REGULATION .45 COLT AUTOMATIC PISTOL
Capacity of magazine, 7 shots. Length of barrel, 5 inches only. Length over all, 8 inches. Weight, 39 ounces. Finish, full blued, checked walnut stocks.
[Ill.u.s.tration]
Cartridges. Calibre .45 U. S. Government, 230 grain bullet. Calibre .45 Colt Automatic, 200 grain bullet. (Both rimless; smokeless powder; full jacketed bullet.)]
White being the most conspicuous of all it takes fewer spots of white to dominate. As these spots are on a black sheet of paper very few spots of white would draw attention from all the colours.
As ivory is fragile, a big silver or plated bead front sight is better for a military automatic pistol or rifle.
The first thing I did when I got my United States .45 Colt Automatic pistol was to put on it a white silver bead front sight, first removing the regulation black knife edge front sight.
I then made the U in the hind sight very big. This pistol has been carried through the war by my chauffeur, W. Francis, who entered the Russian Army as a volunteer and has gained the St. George's cross for bravery and he is delighted with the sighting of the pistol, and can do very rapid shooting with it.
For practical use of the pistol in war, self-defence, or duelling, what is needed is a strong set of sights which can hardly be injured under the roughest usage; sights which can be seen instantly in a very dim, as well as strong light.
The best sights for such purpose are those which are used on duelling pistols.
It is most extraordinary that all pistol sights except the French duelling ones are so very unsuitable.
The military front sight consists of an upright narrow rod as seen when aiming. This is very thin and high and is black, with the top, when it has been used for any time, polished a dull grey, from use.
The hind sight has a very minute notch in it. The result in aiming is as follows: You faintly see a very thin black rod with a hazy top against the dark object you are trying to shoot.
By searching for it very carefully you see a microscopic notch in the hind sight, much too small to enclose this rod when aiming.
You cannot keep your elevation in shooting. As soon as you try to take the top of this front sight in your minute notch you lose sight of it altogether.
The rod so blocks the notch that you do not know if you have the front sight centrally in the notch or at one side.
In fact if I was asked to devise a set of sights to prevent a man being able to shoot well, the regulation military sights are what I would choose.
If strong enough the ivory ball would be the ideal colour for a front sight, as it is a dull white, instead of the reflection which sometimes comes from silver highly polished.
What is called "frosted" silver would be a good surface for the silver front sight if it did not tarnish.
The back sight should be just high enough above the barrel to avoid blur when the barrel gets hot, but otherwise the lower it is the better, having a big U-shaped notch large enough to enable the white front sight to be seen in the notch when showing a slight ring of daylight all round it; both sights as low on the barrel and as far apart as possible.
This combination of sights is seen instantly without any searching or eye strain. All you have to do is to look at the object you want to hit, paying no attention to sights, till your fully-outstretched arm, coming up by sense of direction, points the pistol at the object, and you see before your eyes this silver ball in the middle of the U of the back sight.
Snap-shooting is made more difficult with military sights on a pistol and accounts for many men being blamed for being bad pistol shots, whereas, it is really the fault of the sights. I cannot make good shooting even at a stationary target with such sights and for rapid firing or at moving targets my shooting is much inferior to that with the same pistol, when fitted with duelling sights.
I can understand the English-speaking nations not using duelling sights, as very few ever shoot a duelling pistol, but that the Continental nations, with their knowledge of duelling, have not adopted duelling sights is to me very strange.
The same remark applies to military rifle sights which are such as no big-game shooter would dream of using.
METHOD OF OPERATION
A loaded magazine is placed in the handle, and the slide drawn fully back and released, thus bringing the first cartridge into the chamber, leaving the hammer c.o.c.ked and the pistol ready for firing.
If it is desired to carry the pistol fully c.o.c.ked, the safety lock may be pressed upward, thus positively locking hammer and slide. The safety lock is located within easy reach of the thumb of the hand holding the pistol and may be instantly pressed down when raising the pistol to the firing position.
[Ill.u.s.tration: PLATE 14. UNITED STATES ARMY REGULATION .45 COLT AUTOMATIC PISTOL. SECTIONAL VIEW]
To lower the c.o.c.ked hammer, draw it back with the thumb until it forces the grip safety in flush with the frame; at the same time pull the trigger, then lower the hammer with thumb.
SAFETY DEVICES
It is impossible for the firing pin to discharge or even touch the primer, except on receiving the full blow of the hammer.
The pistol is provided with two automatic safety devices:
The automatic disconnector which positively prevents the release of the hammer unless the slide and barrel are in the forward position and safely interlocked; this device also controls the firing and prevents more than one shot from following each pull of the trigger.
The automatic grip safety which at all times locks the trigger unless the handle is firmly grasped and the grip safety pressed in.
The pistol is in addition provided with a safety lock by which the closed slide and the c.o.c.ked hammer may be at will positively locked in position.
CHAPTER XLVII
RECOIL
When buying a pistol the amount of recoil you are able to stand plays an important part.
This is not entirely a matter of physique.
A slight, wiry man, whose hands and muscles are in hard condition, and who "gives" to the recoil will be able to shoot a pistol having a recoil which would knock all the shooting out of a man who was in a flabby condition, or not accustomed to manual work, even if that man were much heavier and stronger.
Some men can bear punishment better than others.
The duelling pistol has not only no appreciable recoil, but the recoil is distributed by the big stock over the whole of the hand.
The duelling pistol has the longest stock of any pistol and also has no projections to hurt the hand.
The pistol most people would imagine has no recoil is the small .32 pocket revolver and this is the very one whose recoil hurts more than almost any other pistol.
Recoil depends on the proportion between the cartridge charge and the weight of the pistol.